Hailing from Canada, Arizer set out to make a vaporizer comparable to other well-known units for a fraction of the price. Utilizing true convection, the V-Tower is a convenient and reliable desktop vaporizer. The V-Tower uses glass components perfect for maintaining flavour and keeping clean. The digital readout allows for temperature, volume and C/F control, while the wide base keeps the device sturdy. The exterior of the unit is high grade, dual-wall, stainless steel that stays cool to the touch. However, the glass pieces get hot. Seriously.
To use: Press power button to turn ON/OFF. Unit will beep and digital readout will appear. Toggle through precise temperatures by pressing the up and down arrows. Hit the menu button to silence unit to switch between Celsius and Fahrenheit, or set timer. Unit takes about a minute to heat up fully. Remember the element is wrapped in glass, so it will get HOT. It is recommended for first time use to let unit burn off excess materials for roughly 5 minutes before using. Optimal temperature is based on moisture content of your herb, amount being used, whether it’s fine or coarsely ground, how discreet you’re trying to be and of course the type of hit you enjoy. Somewhere between 180-220⁰C is a great place to stay within, remember it’s always easier to add heat than to remove it. While you’re waiting for your unit to heat start packing your bowl, and once heating is completed connect bowl with glass surrounding heating element. After bowl is placed on device ONLY touch the black rim (this black rim should be at the top) – the rest of the glass will be TOO HOT. I cannot stress this enough, you WILL burn your fingers. After the bowl is in place add glass whip. Draw slowly to achieve proper hits. Adding heat as your session increases is a great way to utilize all your herb has to offer. When herb is finished it will lose it’s flavour and will be a dark brown colour, however it will still be the same consistency as when you put it in. Save your vaporized material for making edibles. Vaporizing has “decarboxylated” the herb for you – you’re ready to bake!
This is the replacementall-glass tube for theAir II and Solo. This size tube is not compatible with the Argo. The tube is 90mm in length and has a built-in screen to maximize efficiency and effectiveness. Easily cleaned with 99% alcohol, glass ensures a clean, flavourful hit.
This pack features two different types of stainless steel replacement screens for the V-Tower. The flat screens are best used in the bowl to prevent debris from falling down to the heating element and the bucket/dome screens fit perfectly inside the glass elbow piece to block bits from shooting though the hose. They are easily cleaned with 99% alcohol and can be re-used.
This is the replacementall-glass tube for the Argo. This size tube is unique from other portable Arizer vaporizers, it will not work for the other units. The tube has a built-in screen to maximize efficiency and effectiveness. Easily cleaned with 99% alcohol, glass ensures a clean, flavourful hit.
Hailing from Canada, Arizer wanted to make a small, portable vaporizer without sacrificing function and flavour. Utilizing a hybrid conduction/convection heating method and a glass mouthpiece equals the recipe for smooth, tasty hits. The unit has 5 pre-set temperatures at optimal range and the removable battery is able to be charged in the unit or with a separate dual-battery charger. Included are caps for pre-packing a bowl and a carrying case for portability.
To use: Press down the middle of the button to turn ON/OFF. When turning on light flashes and unit beeps. Choose temperature by using the up and down arrows – different temperatures are shown by different colour lights. Once unit is heated the light will stop flashing and glow solid. Before using device initially heat the unit up to the hottest setting (red) and let it sit for a full cycle. After about ten minutes the device will shut off by utilizing the auto-shutoff. This allows for the pressure fitting to expand and the glass mouthpiece to slide in perfectly. After the initial run, the unit is ready to use! The more discreet you’re aiming to be, and the amount of moisture content in your herb are two of the main factors in choosing the right temperature setting. Remember it’s always better to start off low and add more heat as the session progresses. Green (middle heat) is a personal favourite! While waiting for the device to heat up, you can start packing your bowl. Make sure your herb is ground up so heat can pass through it easily. Loosely pack your bowl and turn device upside down to insert mouthpiece/bowl. You can attach your mouthpiece before or after unit is fully heated. Device will shut off after 10 minutes. Leave unit off and allow to cool for increased longevity of the vaporizer. Pro tip: Long, light draws are more effective than short, hard pulls. When herb is finished it will lose its flavour and will be a dark brown colour, however it will still be the same consistency as when you put it in. Save your vaporized material for making edibles. Vaporizing has “decarboxylated” the herb for you – you’re ready to bake!
This is the replacement mouthpiece for the V-Tower whip. Made from glass, the mouthpiece is easy to clean and provides superior flavourovertypical plastic or metal pieces commonly used on other devices.If you’re struggling to remove the old or broken piece out of your whip, try submerging it in some hot water for a bit to loosen it up.